Recent Jobs For Summit Environmental Solutions

Customer Photo Solutions Provided
Brian Q.
Fredericksburg, VA
October 29, 2021

Install diamond reflective radiant barrier on the roof rafters. Will be installed starting at the soffit and ending at the ridge vent. Will help radiate heat away from the attic space. Remove the fiberglass insulation in the rim joists in the basement. Spray foam the rim joists with 2 inches of closed cell spray foam. Old fiberglass insulation will be removed from the property and disposed of.

Joseph H.
Fairfax, VA
October 29, 2021

Blow over existing insulation with new cellulose insulation to reach levels of 14 inches. Baffles at soffit lines will be replaced and baffles added around the entry door. Insulate entry door with foam board insulation.

Bhumip P.
Alexandria, VA
October 28, 2021

Remove all the insulation, fecal matter, and nesting in the main attic space only. (Vaulted section over garage area inaccessible). Sterifab to disinfect and treat for mites, lice, and bacteria. Install new baffles at the soffit lines and around the entry point. Install can light covers over the recess lights. Air seal the gap and conduit lines with spray foam insulation for better energy efficiency. Insulate the entry door with foam board insulation and install weather stripping around the entry point. Blow in new cellulose insulation to R49 (14 inches). Install metal color to match home as best as possible (saddle) on three eaves on the front of the home. Install one RVG (roof vent guard) over the attic fan to prevent entry of animals. Include sealing up corner channels and conduit lines that mice could enter the home.

Ted K.
Woodbridge, VA
October 19, 2021

Blow in all new cellulose insulation to reach a level of 14 inches. Weatherstrip and insulate attic hatch. Install baffles to keep insulation and proper place

Brenda B.
Alexandria, VA
October 18, 2021

Install baffles at the soffit lines and around the entry point. Blow over existing insulation to reach levels of R49 (14 inches).

Stephanie Q.
Vienna, VA
October 14, 2021

Remove all the insulation to include the insulation in the soffit areas. Air seal gaps and conduit lines for better energy efficiency. Install baffles around the entry point and at the soffit lines. Insulate the entry door with foam board insulation and install weather stripping. Blow in cellulose insulation to R38 (11 inches). Remove the old vent on the roof and install a 750 vent. Route both fans with insulated flex lines to the new 750 vent. Install one roof vent guard over the attic fan to prevent entry of animals into the attic space.

Kevin M.
Woodbridge, VA
October 13, 2021

Remove existing blown in insulation. Sanitize attic space as able. Install new blown in to current recommended r-49 level throughout. (Approx 13’). Air seal accessible top plates, gaps and ceiling penetrations 1" or less with sprayfoam.

Kristie J.
Fredericksburg, VA
October 9, 2021

Replace section of fallen R11 blanket insulation on basement wall with new R11 blanket insulation with white vapor barrier. Secure to walls with hilty nails. Seam tape the rest of the seams of the existing vapor barrier R11 insulation in the walls of the basement. Seam tape a couple of tears to secure the vapor barrier. Before work can begin, all items must be moved away from the walls for adequate access.

Justin R.
Ashburn, VA
October 7, 2021

Blow over 5 inches on main attic floor with cellulose. Blow over 3-4 inches on vaulted ceiling area. Apply 2 inches of closed cell foam to wood rail at top corner of vaulted ceiling in attic space to air seal.

Atseez N.
Fredericksburg, VA
October 5, 2021

Blow cellulose insulation into the attic space above the bedroom over the garage. Currently has fiberglass batted insulation. Summit will add approx 8-10” of blown in cellulose insulation on top of the fiberglass batts to raise the R value to above R-49 (current code). In addition Summit will rake and evenly spread the existing attic insulation in the main attic area of the home. Summit will drill a drywall plus out of each stud bay in the front exterior wall of the garage. We will then insert the insulation blower hose in the space and dense pack the stud bay with cellulose insulation. After filling each stud bay as much as possible Summit will replace the drywall plugs and install one coat of drywall compound to each patch. Price does not include finishing the drywall or painting. Summit will push back the existing insulation in the attic of the home to locate all accessible ceiling penetrations. We will then seal all accessible gaps with foam insulation to prevent air leakage from the conditioned living space below. After air sealing the technicians will rake the existing insulation back into place.

Sophia L.
Springfield, VA
October 4, 2021

Replacement of rear window on left side at back of home that has wooden framing on the interior, measurements from outside is a 41 x 43 standard window and new window to be replaced will be a double hung double pane low E window. Color to be white. Need installer to re-measure for exact measurement to assure correct fit. New insulation weatherstripping to be installed around window when installed.

Edwin C.
Ruther Glen, VA
October 4, 2021

Install baffles as needed or front left and right hand side of empty attic and blow R38 cellulose insulation to current standard. Courtesy treatment for mice around exterior of building.

Linda S.
Vienna, VA
October 2, 2021

Screen exterior left and right gable vents on home to prevent entry into attic by wildlife. Install stainless RVG over attic fan on rear roof to prevent entry back into attic for wildlife. Box off soffit at roofline on rear center left portion upper roof using white metal to prevent wildlife from entering into contractors gap. Replace two shingles black asphalt on rear right lower gutter line behind garage that are broken and has tape over top.

Paul S.
Vienna, VA
October 2, 2021

Screen left and right exterior gable vents to prevent wildlife from entering attic. Install two are veggies on your attic fans to prevent wildlife from entering into attic. Replace attic fan and main attic with a new 600 CFM hardwired attic fan. Run new 15 foot flex duck in main attic from bathroom exhaust to port at roof to exhaust humidity, existing come detached due to it being taped. Run a coupling and use screws to ensure that it doesn’t come detached again. In closet of master bedroom over doorway use killz spray paint after wiping Wall, Apply one coat in over a parent mold that is growing. Install baffle war using cardboard around Scotto opening into attic to prevent Insulation from falling down.

Zena S.
Annandale, VA
October 2, 2021

Remove all insulation from walls and to of CMU outcrop for chimney. Clean & Disinfect entire room. Install new fiberglass batts as before.

Abdellatif N.
Alexandria, VA
October 1, 2021

Existing blown cellulose is around 8.5 inches in depth with some low spots scattered through the attic. Blow over additional 3 inches of cellulose to bring the total R value up to R38-R40. Install insulated attic tent at entry point. Install baffles as needed.

Danielle B.
Alexandria, VA
October 1, 2021

On backside of home, indicated by the technician, temporarily the gutter and replace the 1x6 fascia board. Install white sheet metal and secure under the existing drip edge. Reinstall the gutter after work is finished. Temporarily remove the gutters on the rest of the home and check the fascia board. If the fascia board has to be replaced it will be an additional charge. Wrap the fascia board on the rest of the home with white metal and secure under the existing drip edge. Some areas of the gutter lines do not have drip edge and will be installed during the repairs. Reinstall the existing gutters after all work is complete.

George S.
Fairfax, VA
September 27, 2021

Remove squirrel nesting from the soffit lines. Install baffles at the soffit lines and around the entry point. Move insulation as best as possible to air seal gaps and conduit lines. Sterifab entire attic space to disinfect. Blow over existing insulation with cellulose insulation to reach 14 inches (10 inches will be added to the existing).

Steven M.
Spotsylvania Courthouse, VA
September 25, 2021

Remove existing soffit line and damaged plywood on the backside of the home indicated by the technician. Wipe down the existing soffit as best as possible and reinstall the existing j channel and vinyl soffit back in place properly.

Kevin M.
Oakton, VA
September 24, 2021

Treat attic for rodents two times prior to clean up and removal of fecal matter, after installation is removed clean up visible dropping some rodents and disinfect to kill any bacteria, parasites, or fleas. Blow in r38 cellulose insulation to current standard.

Zack G.
Centreville, VA
September 22, 2021

Cut ceiling of garage between studs and run insulation holes to back of garage and fill pack or 19 to our 22 rating of cellulose insulation put cut out strips of drywall back in place same tape mud and sand to prep for paint only. Patch hole on right hand side of garage at wall under shelf mud and sand and prep for paint only

Sarah P.
Burke, VA
September 20, 2021

In the main attic space remove all the insulation and raccoon feces. Sterifab to disinfect and treat for mites, lice, and bacteria. Air seal the gaps and conduit lines for better energy efficiency. Insulate the entry point and install weather stripping. Install baffles at the soffit lines for proper ventilation and around the entry point. Blow in new cellulose insulation to R49 (14 inches). In lower attic space air seal the gaps and conduit lines as best as possible. Remove unused rolled insulation from the attic space. Install baffles at soffit lines for proper ventilation and around the entry point. Insulate the entry point and install weather stripping. Blow over existing insulation to reach levels of 14 inches (R49). A total of 11 inches will be added to the lower attic space. Evidence of a raccoon was found in the main attic space. If client goes with any work from the three estimates given tracking for the raccoon will be down at no charge. A metal temp patch will be done after it is determined the raccoon is no longer in the attic space.

Andrew J.
Arlington, VA
September 18, 2021

Install One Attic Fan with Roof Vent Guards. Solar Powered Attic fan with Humidistat/thermostat will be installed for lower attic space. Install thermax insulation board on the indicated knee wall and entry door to the lower attic space. Install one attic tent to the main attic space and seal with spray foam.

Sky P.
Herndon, VA
September 17, 2021

Cut out scuttle opening to attic and frame to include reinforce for a weight capacity of 350 pounds, install pull down ladder for weight capacity of 350 pounds. Spray foam insulate around entry to attic to reduce energy loss and insulate around ladder. Replace torn section of flex duck approximate 8 inch in diameter which is approximately 10 foot long.

Patrick M.
Springfield, VA
September 16, 2021

Remove all the batted/blown in insulation and bat fecal matter. Sterifab to disinfect and treat for mites, lice, and bacteria. Install baffles at the soffit lines and around the entry point. Air seal the gaps and conduit lines for better energy efficiency. Insulate the entry door and install weather stripping. Blow in new cellulose insulation to 14 inches (R49).

Page: <<  1 2 3 4 5 6 7 >> 
Total: 273

Our Affiliates
    Expertise Best Roofers in Fairfax 2018 logo Accredited Business logo

Testimonials