Remove old batted fiberglass insulation and boards, animal nesting, feces. Sterifab entire attic space’s to disinfect. Air seal gaps and conduit lines with spray foam insulation. Check the wires for any damage. If major damage is found during installation client will be notified. Blow in new cellulose insulation to R49 (14 …

28x18Remove old batted fiberglass insulation and boards,animal nesting, feces. Sterifab entire attic space’s to disinfect. Air seal gaps and conduit lines with spray foam insulation. Check the wires for any damage. If major damage is found during installation client will be notified. Blow in new cellulose insulation to …

Remove all of the blown in fiberglass insulation. Air seal all gaps and conduit lines with spray foam insulation. Install new baffles at the soffit lines, hvac unit, and around the entry point. Insulate the entry door with foam board insulation and install weather stripping at the entry point. Blow …

Blow over existing insulation in the main attic space to reach levels of 14 inches. New cellulose insulation will be used. Areas closer to the soffit lines will have only 10 inches due to the small nature of the attic space. New baffles will be added to the soffit lines to keep …

Remove all accessible insulation and mouse fecal matter in the attic space. Use Sterifab to disinfect. Air seal gaps and conduit lines for energy efficiency. Install new baffles at the soffit lines. Install an attic tent over the entry point. Blow in all new cellulose insulation to reach 14 inches (R49). …

Apply 2 new niches of closed cell spray foam on floor 1 and 2 as indicated by technician. In agreement areas are outlined in pictures. Spray foam to be applied where dry wall meets decking . If any extra areas need spray foam that are not in pictures customer may choose to add for …

Break up concrete in 3 window wells and excavate down 12 inches. Back fill with type 57 stone. In right side well cut out old sealant and reapply epoxy at bottom left corner where metal well meets the foundation wall.

Remove all of the batted/blown in insulation in the attic space. Remove mouse feces and use sterifab to disinfect. Use copper cloth to seal possible entry points for mice. Air seal gaps and conduit lines with spray foam for energy efficiency. Install foam board insulation on the entry door …

Remove all old blown in insulation from attic. Apply closed cell spray foam to all cracks and gaps. Install new baffles around attic entrance and rafters. Apply 13 inches of blown in cellulose insulation giving the customer an R-value of 49.

Cut roof at ridge line for main roof and front reverse gable. Install full poly ridge vent with synthetic cap shingles.

Blow over 5 inches of cellulose. Install baffles at all eaves.

Blow over 5 inches of cellulose. Install baffles at all eaves.

Close gaps and paint ( savanna wicker) in front of home to help prevent birds from entering attic. Screen gable on front of home with 1/4 inch stainless steel. Install sheet metal in attic as indicated by technician. Reconnect soffit on right side of home. Attic Fan Cover. Install new stainless steel …

Remove all batted and blown in insulation in the attic space. Treat any mildew spots with Sterifab. Air seal gaps and conduit lines for energy efficiency.

Remove damaged rake board and rake board cap on right side of home. Replace with new pressure treated lumber and paint white. Install 2 new box outs to reinforce areas above garage.