Install 2” thick spray foam insulation on knee walls in second floor front of home. Insulate and weatherstrip hatch/door. Master bedroom side only.

Remove all insulation. Sanitize attic with bacteria killing agent. Install baffles to keep insulation in the proper place. Insulate chests of drawers with fiberglass batts. Air seal all cracks and crevices and penetrations from wiring, plumbing, and HVAC, etc. Weatherstrip and insulate attic door. Blow in all new cellulose insulation …

Remove all the fiberglass insulation in the main attic space. Include removal of old baffles at the soffit lines.

Remove all the batted/ blown in insulation and in the attic space. Sterifab to disinfect and treat for mites, lice, and bacteria. Air seal any gaps and conduit lines. Install can light covers over recess lights. Install a attic tent for better energy efficiency. Install baffles at soffit lines. Replace …

Remove shingles on backside of roof only. One piece of plywood will be replaced due to damage. Install new underlayment, ice/water shield, roof boots, and shingle color to match existing as best as possible.

1. Install stainless steel screen to the left and right gable vents on exterior of home. 2 Install three pipe caps over exhaust pipes on top of roof 3. Vacuum 1350 square-foot of attic insulation including removing all dead rodent and droppings. 4 Apply Sterifab treatment to attic to to Kill any bacteria and parasites …

Remove all insulation. Sanitize the attic with a mildew and fungus killing agent. Install baffles to keep the insulation in the proper place. Air seal all penetrations, electrical, HVAC, plumbing, and all cracks and crevices. Weatherstrip and insulate attic hatch. Blow in all new cellulose insulation to a depth of 14 …

Main home and garage in the front Removal all of debris and shingles from the roof and property. Install new ice/water shield, synthetic underlayment, new roof boots, shingled ridge vents, flashing, brown metal drip edge, and new Tamko three tab shingles. Main home and front garage Remove old gutters …

Remove old blown/batted fiberglass insulation and animal feces. Sterifab entire attic space to disinfect. Install baffles at the soffit lines and around the entry point. Air seal gaps and conduit lines with spray foam insulation. Install can light covers over the recess lights for better energy efficiency. Check the …

Remove section of shingles on backside of home close to the rain diverter. Install new ice/water shield and light grey architectural shingles. Shingles will not fully match existing due to age. Replace the rain diverter with a new one. Remove siding 1 foot up along the entire shed roof and …

Remove all insulation. Sanitize the attic with mildew and fungus killing agent. Install baffles to keep insulation in proper place. Weatherstrip and air seal attic hatch. Air seal all cracks and penetrations from wiring, plumbing, and hvac, etc. Blow in all new cellulose insulation to a depth of 14”, R49. Install …

In two lower attics with access points through the knee walls blow in new cellulose insulation to reach levels of R49 (14 inches).

Remove shingles and debris on backside of roof only. Check the plywood for damage and replace if needed. Install new synthetic underlayment, ice/water shield, new shingled ridge vent, roof boots, 750 vents, drip edge, and shingles to match front side shingles as best as possible. (Tamko three tab rustic black) …

In the rear attic space remove the batted/blown in fiber glass. Sterifab to disinfect. Air seal gaps and conduit lines. Include removing the accessible blown in insulation on the edges of the main attic space. Blow in new cellulose insulation to R49 (14 inches). Some areas will have less due …

Demo old batted insulation in main attic. Blow in cellulose to achieve R38 insulation. Add baffles around hatch entry point. Replace damaged entry hatch with PVC hatch, weather stripping and foam board. Apply thermax foam board over existing batted, spray foam the wedge area where there is no insulation present. …